Complete Pure Water Processing Line
Complete Yoghurt Processing Line
Complete Fruit Juice Processing Line
Complete Carbonated Processing Line
Complete Pasteurized Milk Processing Line
Complete UHT Milk Processing Line
Vertical CIP system
Reverse osmosis purification system for pure water

Add:Guangzhou baiyun district Xia Mao guanghua road section of the east side of the world exhibition center in A3 building 4-5
TEL:(+86) 020 86303658
Phone:13829791355
mr wang
Fax:(+86) 020 86074607
Site:www.hadajixie.com
Mail:info@hadajixie.com



Local:HOME >> Complete Line >> Complete UHT Milk Processing Line

Complete UHT Milk Processing Line


/ // // /


Description

With a product that can be stored for long periods without spoiling and with no need for refrigeration, there are many advantages for both the producer, the retailer and the consumer. This includes expensive products such as cream, desserts and sauces.

In a modern UHT plant (Ultra High Temperature) the milk is pumped through a closed system. On the way it is preheated, highly heat treated, homogenized, ultra highly heat treated, cooled and packed aseptically. Low acid (pH above 4.5 C for milk more than pH 6.5) liquid products are usually treated at 135 C 150C for a few seconds holding, by either indirect heating or direct steam injection or infusion. High acid (pH below 4.5) products such as juice are normally heated at 90 C 95C for 15 C 30 seconds holding. All parts of the system downstream of the actual highly heating section are of aseptic design to eliminate the risk of reinfection, include aseptic packaging in packages protecting the product against light and atmospheric oxygen. Ambient storage is normal.

Various UHT systems

There are two main types of UHT systems on the market.

In the direct systems the product comes in direct contact with the heating medium, followed by flash cooling in a vacuum vessel and eventually further indirect cooling to packaging temperature. The direct systems are divided into:

steam injection systems (steam injected into product),

steam infusion systems (product introduced into a steam-filled vessel).

In the indirect systems the heat is transferred from the heating media to the product through a partition (plate or tubular wall). The indirect systems can be based on:

plate heat exchangers,

tubular heat exchangers,

scraped surface heat exchangers,

Furthermore it is possible to combine the heat exchangers in the direct systems according to product and process requirements

The figure below is an indirect system - tubular UHT plant as an example

Whole line including

1.Water Treatment section

2.Milk Receiving or powder dissolving Section

3.Preparation Section

4.UHT Sterilization Section

5.Filling & Packaging Section

6.CIP Cleaning Section

7.Chiller

8.Compressor

9. Steam Boiler

10. Installation Material

Technical parameters

Raw material Fresh cow milk, powder milk

Product UHT whole milk, UHT skimmed milk, UHT flavor milk, etc

Capacity 2T/DC500T/D

Product package Brick shape aseptic carton, (like Tetrapack) ,Pillow shape aseptic pouch, plastic bottle, etc